Tag: Glass polishing

Glass drilling machines are designed to drill holes into annealed glass.They can drill variety of shapes and can be used on the edges of the glass aswell.

A glass drilling machine is the best way to increase productivity and efficiency of a glass fabrication shop. Many enterprises are making use of this machine to save time and cost. While the tabletop drilling machine is good, it is not as superior as the two-sided, vertical glass drilling machine! With its pinpoint accuracy, you’re sure to always have a clean hole and a safe drilling.

Benefits of Two-Sided Vertical Glass Drilling Machines

Some benefits of using this more efficient machinery include increase in speed, quality, and productivity. Unlike tabletop drilling machines, vertical glass drilling machines are much faster. Using a semi-automatic, two-sided drilling machine and operator can drill a typical hole three to four times faster than with a tabletop drill.

The quality is also enhanced as the machine drills part of the way through the back and then drills the rest of the way through from the front, creating a clean hole without any blowout that can occur with one-sided drilling. Scratches are also minimize and this helps in the glass polishing process later on. Having a defined glass drilling station can also reduce labor costs, and speed up the glass fabrication process. This also increases the shop’s competitiveness and makes it different from other shops. Make sure to purchase glass drilling machine from professionals only as they are the ones who know how to handle the machine and fix any issues it might have.

Most of these machines operate off a standard110-volt power source and there’s no need for the shop to invest in powerconversion equipment or industrial outlets. These machineries also come invarious sizes and capacities, so you can choose one that fits your needs.Seeking advice from an experienced glass fabricator or glass machineryrepairman can be helpful when choosing which type glass drilling machine to buy.

End Note

A modern glass drilling machine is a must for any glass fabricator as it not only enhances productivity, quality, and speed; it also reduced labor costs and work overload. However, make sure you team up with glass specialists as they are the ones who can advise you on glass machinery and inspect or repair your gadgets in case there are machine failures or malfunctions.

Glass is referred to as one of the most beautiful materials used in almost every object. But just like all materials, it is prone to dust, chemicals, and sun rays. Glass polishing is a method used to ensure the glass has a smooth and nice finish once it has been shaped. This contributes to its aesthetics and its shelf life. 

How do Glass Polishing Works?

Polishing is a great way to get rid of scratches, abrasions, and other types of deformities on glass surfaces. By adding an additional layer of protection, polishing aims of achieving a premium quality finish of the glass. Glass polishing machines are prone to damage and needs to be repaired or inspected on a regular basis.

Glass Polishing Additives

The two main key components of glass polishers are abrasive and surface protector. Usually extracted from natural metals, abrasives provide a shiny, scratch-free, and uniform surface to the glass.

A wax substance can also be used to seal surfaces. The wax can either be a natural one or ester, acid, and saponified. This further strengthens the durability of the glass and ensures a shiny and smooth finish to the surfaces. Thus, it’s highly recommended to have a professional do the glass polishing work as the latter has the necessary knowledge to ensure a perfect work.

Things to Look Out For

Polishing requires a high temperature to be applied on the glass and this should be done by an experienced person only. Too much heat can fracture the glass and make it weak. Too much time and pressure at the same time can break the glass as well. This is a high risk when people try to polish glass by themselves, that’s why it is recommended to have professionals do the job instead.

Common Misconceptions

This is a short list of some common wrong thinking people have about glass polishing:

  • Glass can be corrected for 100%. No glass can be corrected for 100% as it is still a fragile material to handle.
  • Polishing will make the glass act like a fun-house mirror. This is not true as polishing only helps in removing scratches and makes the glass smooth and shiny.
  • Polishing causes more damage than good. Unpolished glass remains one of the weakest materials and it is more likely to break.
  • Polishing will make the glass hydrophobic when this is not true at all.

Thus, glass polishing is a crucial step in glass fabrication and needthe expertise of professional glass handlers for it to be impeccable.

Follow us

Partenaires