Tag Archives: Rain Gutter Installation

  • Home
  • Posts tagged "Rain Gutter Installation"

Tag: Rain Gutter Installation

How to Clean Rain Gutters

Summary:

Gutter cleaning: check the installation

The essential gestures for gutter cleaning:

  • Step 1: Remove the leaves from the gutter
  • Step 2: Clean with a pressure washer

Cleaning a gutter: dedicated tools

After gutter cleaning: taking stock

Gutter cleaning: don’t forget safety!

Extend the life of your eavestroughs with regular drainpipe cleaning

For a gutter to continue to be useful throughout the seasons, it is essential to maintain it, which involves:

– Cleaning the entire eavestrough,
– gutter repair.

This maintenance will prolong the gutter lifespan and avoid the need for major repairs or changes to gutters that are no longer in use.

Gutter cleaning: check the installation

There are two aspects to the maintenance of a gutter:

– cleaning the gutter channels: this involves removing the accumulation of dead leaves, branches, pine – – needles, large dead insects, etc..,
– checking that your eavestrough is working correctly:
– absence of leaks at the connections, births, along the entire length of the sections,
– no major obstruction,
– the hooks are securely fastened to the rafters (if necessary, tighten the screws), and the rails are securely fastened to the hooks (the gutter flanges may have shifted).

Essential steps for gutter cleaning

Step 1: Remove leaves from the gutter

Unfold the ladder along the façade, making sure it is stable and secure. Your ladder must protrude at least 1 meter from your gutter so that you can work comfortably and safely.

Take a trowel, bucket, and gloves with you.

Work either from the roof or from the ladder.

Clean the gutters of various residues: moss, leaves, soil…

If you need help with the trowel to take them off (without damaging your gutter) and put them in the bucket.

Lower all debris to the ground.

If you have a lot of trees in your garden, it can be useful to install a system to prevent leaves from accumulating in your eavestrough and make it easier to clean: gutter guard, toad, or leaf guard are convenient accessories.

Note: do not work on rainy and windy days to avoid slipping and falling off the ladder!

Step 2: Clean with a pressure washer

To clean your gutter:

– Unfold the hose so that you have enough length on the roof and can work efficiently.
– Climb up the ladder with the hose and clean the entire length of the gutter.
– Check the condition of the gutter utility hole and clean it if necessary.
– Also, remember to clean the downspout, which may be clogged.

Take this opportunity to check the condition of your installation: hooks, expansion joints, and gutter.

Repairs may be necessary if there are cracks, holes, or lack of stability.

Good to know: if your downspout is clogged, use a ferret to unclog it.

Cleaning a gutter: dedicated tools

There are all kinds of small tools on the market that make it easy to clean gutters quickly and efficiently:

– cylindrical brushes that scrape the inside of the frame,
– pliers with handle can be equipped with telescopic extension,
– gutter cleaners, brush, and scraper, to be mounted on a handle and to be used from the floor.

After gutter cleaning: taking note of the situation

The cleanup could have identified a few problems:

– pierced or cracked gutter,
– broken hook,
– faulty fitting gasket,
– Necklaces ripped off.

These repairs may require the intervention of a professional.

To avoid these complications, you can install gutter protection: gutter guard, gutter toad, or leaf guard.

Gutter cleaning: don’t forget about safety!

Your safety is paramount: working on gutters is a dangerous exercise that must be surrounded by precautions.

Here are a few safety essentials:

ScaffoldingIt provides a more comfortable and safer procedure, but moving it along the walls is a bit more restrictive.
Ladder– Distances: ◦ spaced from the wall by a distance corresponding to 4 times the height, ◦ must protrude more than one meter from your eavestrough to allow you to access the inside of your gutters without difficulty. – With a facade spacer that provides a small setback that is more comfortable to work with. – With non-slip feet.
—————————————————————————-
– Accessories: – a tool holder, a bucket hook: you keep the tools within reach, – a stabilizing foot: you ensure the stability of your ladder on uneven ground, – a ladder attachment on gutter: you hang on to the gutter without damage and avoid the ladder tipping sideways or backward.

Safety harness– If you intervene at a distance of more than 6 meters, this precaution is mandatory. – To be anchored in the wall or in the bottom of the roof with safety hooks. – It’s best to work in pairs to keep the lower end of the ladder while the other climbs. – Important: Beware of close proximity to electrical wires.
Gutter cleaning: for your safety

If Rain Gutter Cleaning, Rain Gutter Installation, Rain Gutter Repair, Commercial Rain Gutters, and Residential Rain Gutters are the things that matter to you at the moment, you can get in touch with CAG Solutions Corp. in Hialeah. They will make sure your gutters don’t let you down!

Remember to share your experience in the comment section below.

Tips to Maintain a Rain Gutter

As important as a flooring, rain gutters are essential in any house to protect water from infiltrating inside the walls or through the door. It is most likely to happen in rainy seasons. In fact, gutters, those unsung heroes of home exteriors, collect rainwater from the roof and divert it away from the house, thereby staving off water damage to the structure and landscaping. It is important to periodically monitor the overall condition of a home. Wear and tear as a result of weather and age occurs in every home, and it is wise to take care of problems before they lead to extensive and costly repairs. Routine maintenance should be done to ensure that everything is well in all parts of the home. This should especially be the case as far as the exterior of the home is concerned because it is the exterior of the home that is most subjected to wear and tear.

1. Maintain Your Gutter

One of the best tips that can be given for the proper maintenance of the exterior of the home is by maintaining the gutter. The gutter is the trough fixed under or along the eaves for draining rainwater from a roof. Gutters in general are also are called eaves spouts, eaves trough, rainspouts, and spouting. Because they are located at the exterior of the home their proper maintenance has a direct impact upon the overall appearance of the home. Maintaining gutters is an easy task. One only has to think about the serviceability they are able to offer once they are rid of everything that they need to be rid of. Clogged gutters can cause landscaping, lawn and shrubbery, walls, foundation, basement, crawl spaces and existing gutter system great damage. This is the reason why these channels should be kept clean at all times.

2. Gutter Maintenance Tips

In maintaining gutters, it is important for one to make sure that he has all the materials needed before starting work. It is not advisable for him to stop in the middle of a task to hunt for a tool. The first step is to clean the gutters with a narrow stiff-bristled brush. A wallpaper brush can be used to sweep out debris when the gutters are dry. It is also not advisable to clean the gutters by flushing them with a garden hose. This might cause the downspout to clog. Gutters should be cleaned when they are dry, and the hose should be used to flush out any remaining debris.

– Clean any leaves, twigs, or other debris off the roof

– Walking on the roof and using an old broom or a leaf blower, pitch all debris down into the yard

– Once the roof is clean of debris, start on the gutters themselves

– Using a narrow trowel or putty knife, gently lift any debris in the gutters out and pitch it down to the yard

– For safety purposes, it is a must to check all the supports when the gutters themselves are clean enough

– Hose the gutters down

– Use the hose to test the gutters ability to rapidly redirect water

3. Gutter Tips

It is not advisable to lean ladders against the gutter. Installing a plastic support piece to the gutter to support the weight of the ladder is what should be done. The support piece in question provides a permanent access point to the roof and is fastened to the wood underneath the roof using galvanized deck screws. It can also be mounted directly to the gutter. Purchasing a ladder stabilizer for added ladder safety is also a must as the ladder stabilizer locks onto the rungs of the extension ladder, preventing the ladder from shifting side to side.

4. Prevention Is Better Than Cure – Gutter Guards

Those who want nice-looking, serviceable gutters for their homes are advised to consider installing gutter guards, screens that prevent debris from entering the gutter. These devices also direct the flow of water away from the house and into the ground. This way, one will have gutters that will prove to be more of a blessing than a curse. Proper maintenance of these devices will cause them to be extremely useful while adding a touch of style to the exterior of the home which they form part of.

Remember that even though these gutters may have more expense in the beginning, it can save you thousands of dollars in the long run by having a better and more secure drainage system. A seamless gutter with no leaks will result in less structural damage to your roof, which you will eventually have to repair if your current standard gutter is not functioning effectively. This is important and should be carefully analyzed when planning. Most homeowners do not give this much thought, but it is an important consideration, nonetheless.

Keep these factors in mind when deciding on whether a seamless gutter is right for you. Your overall goal should be to do it right from the start and avoid costly mistakes that can cost you thousands of dollars down the road.

You can find out more about maintaining gutters as well as much more information on everything to do with rain gutters and downspouts at ABC Seamless Rain Gutters.

Gutter for Rainwater Harvesting

Summary

Gutter: savings with water recuperation

Gutter: 3 modes of rainwater harvesting

Gutter: filtration for each use

Gutter: before opting for water recovery

Efficacy of a gutter: several criteria

Regardless of the type of gutters (hanging gutter, creeping gutter or gutter channel) that your home is equipped with, they can allow you to collect rainwater to water the garden or clean your car.

Most of the time discreet and unnoticed, gutters have an indispensable function: to protect the walls of the house by collecting rainwater and keeping it away from the building’s foundations.

Without gutters, the house is in danger in the following ways:

– Water splashes and runs off the walls and frames;

– Moisture settles in and can even cause serious damage to the frame;

– the floor is hollowed out at the base of the walls;

– mosses develop…

Today, gutters have become decorative: materials and shapes have diversified. They try to harmonize with the style of the house until they match the color of the plaster.

Finally, they can contribute to water savings when connected to a rainwater recovery system.

Gutter: savings with water recuperation

Some gutters, by being connected to a water recovery system, contribute to:

– rainwater being stored in the tank throughout the year;

– significant savings in drinking water;

– a resolutely ecological approach.

In a context where industrial water treatment has a high cost, water recovery is a good way to save our water resources.

Gutter: 3 modes of rainwater harvesting

There are three types of water recovery systems:

Gutter: rainwater harvesting systems
Water useFiltrationCollection systemMore info
1. Sprinkling waterSimple filtration: stop-sheet or toad, is sufficient for this purpose, the water simply needs to be cleared of plant debris.Rainwater recuperator, fitting on the downspout and equipped with a trap door which acts as a weir in horizontal position. Large above-ground plastic tank, directly at the outlet of your downspouts. Distribution by tap.Easy to install. Inexpensive equipment.
2. Water for sanitary facilities (toilet, shower, water for washing machine).Quality filtration. Water quality monitoring is required.The installation of a storage tank is necessary: outdoors (above ground or underground) or indoors, distribution by pumping through a network independent of the city network, with a system to switch to the city network to take over.More expensive. Installation by a professional.
3. Drinking waterVery high quality filtration. Monitoring of the chemical quality of the water is mandatory.Concrete storage tank (it rebalances the acid pH of the water).The installation is done by a professional. Expensive solution, study well its feasibility and profitability beforehand.

Gutter: filtration for each use

The collected rainwater is polluted by:

– organic matter, plants, dead insects;

– particles: sand, mud, metals, nitrates;

– bacteria, microbes, viruses, moulds, etc.

Depending on the intended use, rainwater will not be subjected to the same filtration, so the quality of irrigation water and drinking water is not comparable:

– absence of filtration: for watering, washing cars.

– filtration for domestic water:

– before the pump: classic 50 µm washable particle filter, protects the pump from sludge;

– after the pump: 25 µm activated carbon filter,

– additional filtration for drinking water: reverse osmosis system or UV sterilisation to eliminate bacteria.

Gutter: before opting for water recovery

Here are a few points to consider before getting started:

– if the installation is limited to an above-ground tank, the cost is lower, the maintenance almost nil, so you don’t have to hesitate;

– on the other hand, storage in an underground tank requires a more important implementation: check that the quantity of water delivered by your eavestroughs is sufficient to make this investment profitable by getting professional help to evaluate the annual recovery rate;

– you have to choose the tank volume accordingly, from small capacity 4 m3 up to 15 m3;

– don’t forget to include the price of disposable cartridges in your budget, this item rises rather quickly.

Good to know: Aluminum and copper gutters are not recommended because these materials increase the toxicity of the water.

Efficacy of a gutter: several criteria

When choosing or changing an eavestrough system, it is important to consider its ability to evacuate rainwater.

This efficiency can be measured using various criteria:

– development of the gutter: allows the gutter system to be adapted to the needs dictated by the slope;

– roof surface and the climatic conditions, i.e. the quantity of water to be evacuated;

– slope of the gutter: without slope or with insufficient slope, the water stagnates and does not flow;

– installation of the gutter: water must not be able to flow between the sewer and the gutter;

– watertightness of the gutter: the connections must be taken care of to avoid any risk of leaks;

– diameter and shape of the gutter outlet: nothing must allow for obstruction by debris;

– number of vertical runs: this number depends on the roof surface.

Important: Calling on a professional would avoid this difficulty and would guarantee a result adapted to your needs.

Follow us

Localbiz blog

Partenaires